Elitech is the origin manufacturer of STC1000 from 2005. This is the only official Amazon store sold STC1000 with the right wire diagram.
Specification and Size:
1.Front panel size75(L)×34.5(W)mm;
4.sensor length2minclude the probe.
1. Temperature measuring range: -50~99°C;
2. Resolution: 0.1°C; 3. Accuracy: ±1°C (-50~70°C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC±10%, 50/60Hz;
6. Power consumption: ?3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60°C;
10.Storage temperature: -30~75°C;
11.Relative humidity: 20%~85% (No condensate).
1 x STC-1000 Temperature controller 110v
1 x 2M Sensorv
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.
2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0.
Temperature Measuring Range: -50~99oC?Accuracy: ±1oC (-50~70oC)
Power Supply: 110VAC±10%, 50/60Hz Sensor: NTC Sensor (1PC)
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size?75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Relay Contact Capacity: Cool 10A/110VAC;Heat 10A/110VAC